Package Includes:
1 x 100W Solar panel
4 x Suction cup
2 x Buckle
1 x Alligator clip
1 x Car charger
1 x Manual
1 x Solar Charger Controller
1 x English User Manual
(excluding other decorations)
Specifications:
(Solar Panel):
ISC: 3,33
Voc: 20 V
Technical analysis VPMAX: 18 V
Power: 100W
IPmax: 1.6A
Output: 5 V / 18 V
Size: 660×280x2.5mm (26x11x0.1")
Waterproof rate: IP65
Rate conversion rate: 19.6 20%25
Number of USB ports: double
Material: Monocrystalline Silicone Battery
(Solar Charge Controller):
Shell Material: Plastic
Back Board Material: Iron
Color: Black+Blue/Black+Green/Black
Display: LCD Screen
Batt Voltage: 12V/24V auto
Charge Current: 10A, 20A, 30A, 40A, 50A, 60A (Optional)
Discharge Current: 10A, 10A, 10A
Self-consumption: ＜10MA
Operating Temperature: -35~+60
Max Solar Input: 12V battery, the highest 23V
Float Charge: 13.7V(defaul, adjustable)
Discharge Stop: 10.7V(defaul, adjustable)
Discharge Reconnect: 12.6V(defaul, adjustable)
Charge Reconnect: 13V
Voltage of Open Light: Solar Panel 8V(Light lights delay)
Voltage of Close Light: Solar Panel 8V(Light off delay)
USB Output: 2 way USB output, 5V/2.5A(MAX)
Size: (L)X(W)X(H) 13.3x7x3.2cm
Features:
● Build-in industrial micro controller
● Fully 3-stage PWM charge management
● Big LCD display, all adjustable parameter
● Dual mosfet reverse current protection, low heat production
● Dual USB output, the maximum current of 2.5A, to support Apple's mobile phone charging
● Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection
● Suitable for solar green light, solar light boxes advertising board, solar insecticidal lights, housing solar power generation system, marine solar power generation system, outdoor survival solar power generation system
● Made of monocrystalline silicon, it has a 18~21% high conversion rate.
● Environment-friendly and pollution-free, it realizes the energy conversion from solar power to electric power
● Wide range of applications, it can be used in lots of place such as for car, small household appliances, ect.
SYSTEM CONNECTION
1.Connect the battery to the charge regulator-plus and minus
2.Connect the photovoltaic module to the regulator-plus and minus
3.Connect the consumer to the regulator-plus and minus
NOTE: The reverse order applies when deinstalling, an improper sequence order can damage the controller
SAFETY INSTRUCTIONS
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation
2.The battery cable should be as short as possible to minimize loss
3.The regulator is only suitable for lead acid batteries: OPEN,AGM,GEL, it is not suited for nickel metal hydride, lithium ions or other batteries
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator
Please feel free to contact us if you have any questions. Hope a nice day!